Rainbow Loom French Bulldog Puppy or Dog Charm. 3-D
hello welcome to lovely little bird
designs Lister I’m going to show you how
to make a French Bulldog on the rainbow
loom
I made an all-white one and all burgundy
brown one and I think they came out
really super cute and they have big ears
and the the muzzle comes out and I made
them docked on the tail and I also have
to show you for comparison I have the
English bulldog tutorial too
and this one is shorter than the English
Bulldog and children body length and
he’s a little bit less in the chest area
too both of these dogs have stuffing in
them to make them a little bit more
broader and I’m gonna use the caramel
bands today for this dog but you can use
any color you want they come in a
variety of colors and I’m gonna use
caramel bands to stuff the dog you can
use paper towel to stop the dog Amy
knows our cotton anything you’d like but
I want to match the color of the dog so
I’m gonna use bands so it’s about like
four or five extra bands I’m just gonna
stuff and then sew together but they
also think I’m in variety of colors and
let’s get started again I’ll be using
the caramel color and this is burgundy
brown if you like burgundy or the white
or any other color you’d like so we’re
gonna start out they’re all double bands
and we’re going to place it to from this
pin to this pendant also the staggered
position arrow facing down so once again
double bands okay so it’s I’m here to
here and then here to here then we’ll
place it on the side of the head
okay then we’re gonna work on the
forehead it’s a broad forehead so when
you place a double band from this middle
pin to down here okay and then another
set of bands from the middle pin to the
left and then another set from the
middle pin to the right okay so now
we’re working in the middle of the head
and I’m just going to place double bands
in the middle and then another set going
down and then work on the side of the
head
and then we’re gonna connect these two
pins
and we work on the left side
okay so now we’ll work on the neck area
it’s gonna be a triple band so three
bands push that down that’s three and
now we’re going back to the double and
the length of the body is four stitches
so we’re gonna put four stitches of the
doubles and there is also a small
extension which is really easy to make
for this dog too
so one two three and four you know work
on the side of the body doubles again
and just working our way down okay
so we’re working down the body and then
we’re gonna connect these two pins okay
now we’ll work on the website
and just still working our way down
connecting this pain to this pen
okay now we’re gonna work with the legs
one push these down a little bit and I
work with the hook with this and I’m
gonna make a little Clause I could see
with the other dogs and it’s gonna be a
black and it’s gonna be on the hook
wrapped four times so one two three and
four and the length of the leg is one
two three and four stitches so I’m going
to grab it doubles again and then bring
that in the middle that’s one stitch
here’s number two number three
and finally number four
okay we’re gonna place that one right
here okay we’re gonna repeat and go on
this pin so black again 1 2 3 4 and then
four stitches of the camel double bands
okay that was one two three and four
right here
move to the side and now the back legs
so black 1 2 3 4 and then we’re gonna do
3 stitches on up the double go make a
little fly area – so here’s 1 2 3 and
then we’re gonna take I’m gonna set this
to the side place a double on the loom
and then place another double right here
to connect and then we’re gonna use this
as a little capping band and this is
your back leg pull that back and we’re
gonna grab this one first
and then the right side take it off the
room and I’m gonna place it from this
pin and this pin so one here and then
the other one thank you okay so the back
leg and we’re gonna repeat on the right
side so black one two three and four
then a double of your color and another
double make two
and then another double okay set that’s
beside you need go back to the loom and
then place those two there
place our leg right here and then place
it on this one okay now like I said
before I’m gonna make a dock tail so
it’s gonna be a double and I’m just
gonna wrap it on this pin to time around
two times so one and then two if you
want it to make a little tail
I’ll show you really fast you can place
it place a single wrap it around three
times and then I would assume around two
stitches because they have small tails
so if you want to place a tail so that
would be one and then this would be two
and if you want to make it a little
longer you can make it longer too and
then you can place that here if you want
a little tail but I’m gonna make a dock
tail so we’re not gonna use that now I’m
gonna put a little extension for the
belly to make him broader in the belly
area the chest area too so it’s gonna be
a double and I’m gonna place it from
this pin to this pin
I’ll push that down and then another
double from this pin to this pin and if
you feel like the extension you don’t
want an extension if it’s a little too
hard for you you don’t have to you can
leave the extension out and then just
loom regular when we start filming it’ll
just be a skinnier looking dog so we’re
gonna place another extension here and
then another one here okay so it looks
like this there’s just two bands on the
top okay now we’ll put structural bands
it’s gonna be a single and it’s gonna be
triangle another single triangle and
single time and that is the layout for
the body now we’re gonna move to the
head and I’ll show you how to make that
okay you need one black band for the
nose and then for this area
you’re gonna need four plans that go
down and one that attaches to the top so
we’re gonna meet five total so I’m gonna
use caramel the same shade as the head
okay so it’s gonna be one two three four
five then you place your hook through
and dangle them so that they’re all
around the same length and I do this
because they’re a bit oblong and I don’t
really want one band like this and then
one band like this and then when you
place it on the dog it’s a little
lopsided
so I think’ll them and then make sure
that they’re all around the same blend
take them off place it on your finger
place the black on the hook wrapped
around four times
then you take your hook and slide the
nose in the middle of these bands so it
looks like that looks like a little
bowtie and then I’m gonna take the top
most band I’m gonna bring it down like
that um make sure that it’s one bit
that’s the same band just placing my
hook right through the top band
can you place it I want to this one’s
facing a little bit down and I want the
show it down anyway on the dog because
they face down anyway so I’m gonna
that’s why I didn’t choose this to be my
top band so you can make sure it’s your
top band by just pulling it so you you
know it’s one band cuz if you place it
on the loom you’re gonna and it’s like
you’re picking two different bands it’s
gonna fall apart so this is my top band
I’m gonna place another single place it
right through and we’re gonna place it
from this we’re gonna place it on this
pin and this time so you closely that’s
how it’s supposed to look now I need a
double and I’m gonna place my hook right
through these bands so it looks like
this make sure you got all the bands and
I’m going to place my double on the hook
and pull through and then we’re going to
place it on this band this pin right
here and then this pin so this is your
muscle separated a little bit and then I
want to place the nose on top of this
middle pin
and then when we start looming I’ll take
it off
you can separate here so it looks like
this okay the eyes I’m gonna make two
eyes black you can use beads if you like
place it I’m wrapped around four times
we can make a figure eight and then pull
over again and seam here big you’re
eight pull over or wrapped four times
take another single of the fur color
bring the eyes over and place it on the
pin bring it over this middle pin
separate the ice bring it over place it
on that pin and bring the eyes down so
now we’re gonna work with yours I’m
pushed these down and the ears are pop
right and very big and beautiful so
we’re gonna take two of the caramel
pants whatever bands you want the ears
to be place it on the hook wrap it
around four times one two three and four
move it to the right take another one
one two three four then you take a
double of the caramel then you slide
these two bands on the tupple then you
bring it back on the hook you can
separate these bands then you take a
single twist it upon itself
and then place it on the hook slide that
over
and this is one ear case and now we’re
going to place it on this thing
I keep the ears upright and now we’re
going to make another ear and put it
over here so it’s another single about
four times one two three and four then
another one two three four then a double
and you’re gonna slide them on the
double bring it back on the hook
separate these a little bit and then you
can take a single twist it upon itself
bring it on the hook slide on the single
twist bring it back on the hook and then
place it here and this creates really
big ears and then when we take it off
the loom I’ll show you how to separate
the bands and make it really so this is
your layout make sure it looks like this
and now we can start looming okay
remember there’s extensions here it’s
very simple and I’ll show you how to do
loom everything right now we’re gonna
grab this band first and go underneath
this capping van grab the uppermost two
bands to the left now we’re gonna grab
this
okay so now we’re going to work with the
middle and bring Lumet to this pin so
it’s the bottom bin and we’re just
looming forward
hey now there is this extension and we
will work with that we are only grabbing
this bottom most band so I’m going to go
underneath all this and grab the bottom
2 bands bring it forward to this pin
now we’re only looming this to top most
bands so I’m going to crap that just the
top there’s one and then I’m gonna grab
this uppermost up okay we’re gonna stop
right there put my finger right here now
I’m gonna grab this band right here and
pull it to the side
that’s our extension trying to stop
right there so I just pulled that top to
the side now I have this all nodes and
now I’m just gonna grab the bottom layer
and this one I’m gonna stop and now it’s
this shoulder area someplace my hook
right through grab the bottom bands and
bring it here and you just lose your
extension and everything on this side
now we’re going to repeat on this side
so once again just grabbing this bottom
most band
okay now we’re gonna stop and I’m only
grabbing this band and this band the
top-most ones okay so there’s one and
number two once again place my finger
here and I’m gonna pull this little
extension to the side okay now I’m just
grabbing the bottom bands
okay stop there now I’m grabbing this
shoulder band okay so this is your body
we did all the extensions and now the
neck the neck is a triple band it’s
gonna be all the way at the bottom okay
now we’re gonna work with the head area
and our top most fans are this left side
of the head this pin then I’m gonna grab
this band right here that’s our next one
and now we’re gonna work with the middle
of the head it’s very easy I’m gonna
grab this band right here and pull it
put it on this pin then I’m gonna bring
the snout over so do that really slow
it’s not that complicated so gonna go on
that pin then I’m gonna take the little
nose and pull it over just like that
I want to keep these this band separated
okay so now we’re going to place our
hook right through this pan grab that
next band now we already loomed this one
and this one now our next band is going
to be this top band and we’re going to
bring it to the right
all the way to the right then our next
band will be this left band I only
grabbed one of those I’m gonna grab the
other one
and then our middle band okay you can
see that they’re all separated now we’re
gonna grab the right side and Loom
forward the bottom most band
okay the ear bands there’s a lot of
tension here so be careful when you loom
them and bring it to there to this
middle pin now we’ll work on the left
side of the head
bring to the middle time okay you need a
double band for your Slipknot and then
you make your little slip knot to close
it off and this is what he looks like so
make sure yours looks like this and now
we can take it off the loom
take it off slowly you don’t want
anything breaking okay so we’re gonna
turn this little guy it looks like a
jumbled mess into this little guy so
I’ll show you how to do that right now
okay so we don’t do any more place that
to the side place your finger behind his
head and push his head out just like
that okay you can pull out his eyes if
they’re hiding so they’re more
pronounced use your hook
got one little band hiding there he goes
okay so now I’m gonna stretch out his
neck his body the legs you’re gonna see
there’s the extension right here it’s
two bands they’re thicker on the chest
area and we’re gonna fix the ears later
and the snout I’m gonna help you right
now the neck pick take your hook place
it through these three bands and
slightly tug and it brings the neck up
so it looks like this now this you can
if you like the the muzzle like this you
can keep it like that
but with this breed I like to bring it
out a little bit you can see the
difference by bringing it out so what I
do there’s four bands on the bottom of
this little muzzle I’m going to place my
hook right through the middle loop area
of these four bands that we placed
before so there should be four on this
side and four on the right side and you
can see it right here there’s a gap and
you can see the black band of the nose
so you can hold it like this and do tugs
and it’s gonna bring that muzzle out and
make it more pronounced pull it through
and now he’s more bigger you can see
that and also there’s bands right here
in the middle so you can place your hook
right here and do some little tugs here
to bring that out so it’s more uniform
and then you can if you don’t like you
can put your hook through all of them
and do a little tug and it’s all uniform
he has a beautiful muzzle now you can
squeeze his head so it’s a little bit
more you know it’s shorter and we’re a
French Bulldog like and now we’re gonna
work on the belly and sew him shut and
then fix his paws fix his ears and so
this and he’s gonna look gorgeous
so there’s two extensions right here I’m
gonna add about four to five of the
caramel colored bands as stuffing if you
want to use something else’s stuff and
you can do that too but if you do if you
can you don’t want to use stuffing you
can just fold him and he’ll be a little
bit thinner but he still looks cute
without the stuffing – so whatever you’d
like can replace my hook
there is the two extensions right here
I’m going to place my hook through the
extension just the top the first two
bands
okay so it looks like this and then I’m
gonna take a single band I’m gonna bring
it through make a little Slipknot turn
it down so they’re not so a little bit
more on the belly then I’m gonna take
about four bands this time but if it
depends on how thick you want the belly
and everything and you can do like a
little figure eight and just tuck it in
that belly area the little crevice with
the Bulldog the English bulldog I used
toilet tissue because it was more like a
white body so it was white but this
one’s all uniform one color so I use the
bands for this one but once again you
can use whatever you like so I have my
little thread right here I’m gonna go to
the next little extension stitch and
then make sure none of your bands escape
so and then pull it through
tuck in that band
then I’m gonna now we’re working on the
regular part of the body and my next
stitches right here and I just had
something a band pop out remember you
don’t have to use bands to stick to you
know stuff a fear a little wild that’s
just stuff back in he’s cotton to
anything okay so we’ll go to the next
stitch and then I’m gonna grab my little
thread pull it around
and if you want to sew it right up there
you can sew it there but then go one
more stitch just to be safe
pull it through and then you need your
trusty scissor
and we’re gonna knot it
make sure not to cut yourself someone
hold one and then I’m going to anchor
the other one through one of the other
stitches
when he comes out he’s gonna look so
adorable and when we’re not
okay so you can hide the excess inside
the dog again or you can just snip it
off make sure not to snip the dog just
the excess okay and I can pull him out
and pull the legs down the thigh area
and he is super cute already now I’m
gonna separate this black bands it’s a
clause you just separate them and then
you can do a slight tug on the bottom to
make the paw it brings it forward so I
make some more of the paw I’m gonna do
the same thing here
just a slight tuck and separate those
claws same is back and separate them and
then do a slight tug same here
and slight tug and now they’re flat feet
and we’re gonna work with the ears now
my ears are like all lopsided and
everything you remember we have a band
here and I wrapped a band here
I’m gonna hold my ear and separate the
two bands the two vets so it’s more
uniform
and it goes all the way around here so
that looks a lot better you do the same
thing here you just separate them looks
a lot better now my ears for a little
bit more askew so I’m gonna pull this
and there’s that single twist right here
there’s it’s connected to this band I’m
gonna hold it in the back and just
slightly bring it forward a little bit
and it’s gonna bring the ears more up
and it’s actually gonna move the ears
toward like it’s flat on this side and
not like pointy so I’m going to do the
same thing on this side I’m gonna hold
it and pull it forward a little bit and
it makes the ears and you can play with
the bands again
so the ears are looking good you can
bring my eyes out too so much that cute
little face and now we’re gonna sew the
back of the head you can pick any bands
in the back just so the back shut and
this creates a more 3d dog too
hey stay there and I have a cute little
French Bulldog so once again you can
play with the eyes if you wanted a
little bit more eyelid but I think he
looks adorable this snout is out and
he’s got a short little body and he can
stand and this is the caramel here’s the
burgundy and here’s the white so I hope
you liked this tutorial please subscribe
to lovely lovebird designs and if you
made a tail here you can make the tail
go pop by just placing your hook right
through and then it’ll go up a little
bit so please subscribe bye
